Buy L298N Dual Motor Driver Board with Voltage Regulator on Robotistan Maker Store

L298N Dual Motor Driver Board with Voltage Regulator

L298N Dual Motor Driver Board with Voltage Regulator This motor driver board, designed for driving motors up to 24V, has two channels and can deliver up to 2A current per...
Vendor: Robotistan
SKU: 11787
$1.85
$1.85
  • Robotistan

Free Shipping

Free standard shipping on orders over $100

Free Returns

Learn More.
L298N Dual Motor Driver Board with Voltage Regulator
This motor driver board, designed for driving motors up to 24V, has two channels and can deliver up to 2A current per channel. The L298N motor driver integrated circuit is used on the board. It can be used in sumo, mini sumo, line following robots, and various motor control applications.
Board provides step motor control too.

Features :
  • Board can control two motors seperately.
  • Deliver 2A current per channel.
  • Internal regulator is available.
  • High temperature and shortcut protection is avaliable.
  • LEds, which light according motor direction, are available.
  • Internal cooler is available.
  • Current sense pins are available as emitted.
  • Four screw holes are available at four sides of board.
 
Pin Mapping:
  • ENA: Pin is used for left motor activation
  • IN1: Left motor 1. input
  • IN2: Left motor 2. input
  • IN3: Right motor 1. input
  • IN4: Right motor 2. input
  • ENB: Pins is used for motor channel activation
  • MotorA: Left motor output
  • MotorB: Right motor output
  • VCC: Supply voltage input(4.8V-24V)
  • GND: Ground connection
  • 5V: 5V output
 
Jumper plugged pins are available on the board. These pins can be used for optional usages and activate different properties.
  • CSA: Current output of A motor driver. With a jumper, current draw value can be read as anlog voltage value.
  • CSB: Current output of B motor driver. With a jumper, current draw value can be read as anlog voltage value.
  • V1 is a jumper plugged to the pull-up resistor which sends IN1 input to 5V directly. Through this, as you don't plug it to ground, pin voltage level stays as 5V.
  • V1 is a jumper plugged to the pull-up resistor which sends IN2 input to 5V directly. Through this, as you don't plug it to ground, pin voltage level stays as 5V.
  • V1 is a jumper plugged to the pull-up resistor which sends IN3 input to 5V directly. Through this, as you don't plug it to ground, pin voltage level stays as 5V.
  • V1 is a jumper plugged to the pull-up resistor which sends IN4 input to 5V directly. Through this, as you don't plug it to ground, pin voltage level stays as 5V.
  • 5V-EN jumper activates or deactivates 7805 line. If it's plugged 5v output of board becomes active . If it's unplugged this line becomes deactive.
 

Customer Reviews

Based on 18 reviews Write a review

Related Products

Recently Viewed Products