NX4832F035 – Nextion 3.5 inch Discovery Series HMI Touch Screen

NX4832F035 – Nextion 3.5 inch Discovery Series HMI Touch Screen

Nextion is an HMI solution that combines a built-in processor and touch-memory display with the Nextion Editor software. Using the Nextion Editor software, one can quickly develop the HMI GUI by dragging and dropping components (graphics, text, buttons, sliders, etc.) and coding the way components will interact on the screen using ASCII-based instructions. The Nextion HMI screen connects to the external MCU via TTL Serial (5V, TX, RX, GND) to provide event notifications that the external MCU can process. The external MCU can easily update the progress and return the status to the Nextion screen using simple ASCII-based text. Compared to the Basic Series, the Discovery Series has better MCU performance, the same functions as Basic, and a lower price.

NX4832F035 – Nextion 3.5" Discovery Series HMI Touch Screen Technical Specifications

MCU: 64MHz

Flash: 16MB

Resolution: 480×320 pixels Can also be set to 320×480

Operating Voltage: Min= 4.5, Max= 6.0V, Normal: 5.0V

Working Current: Normal SLEEP Mode (low power=0)= 4.5mA, Deep SLEEP Mode (low power=1)=0.25mA

Serial Port Baud Rate: 9600 bps

Serial Port Mode: 3.3V/5.0V TTL

Serial Port: 4Pin_2.54mm

SD card socket: Yes (FAT32 format), support max 32G Micro SD Card.

Touch Type: Resistive

Touch Resistance: >1 million

Backlight: LED

Backlight life (Average): >30,000 Hours

Brightness : 300nit

Weight 30.3g

Note: A suitable power source of 5V, 500mA, DC is required to run. In deep sleep mode, the wake-up time will be longer, and data is likely to be lost when the serial port receives the wake-up command. Therefore, it is recommended to send a void command and delay for 50ms before running.